AOR AR-3000 Communications Receiver with Telescopic Antenna

Description

OR AR-3000 Communications Receiver with BBC Telescopic Antenna, Condition is "Used". In Good Cosmetic Condition, Comes with Original AIR Power Supply AA2001 , NOTES: Only Accessory is the Power Supply , Tested for power as shown in Photos was good , Tested for sound with External Speaker Not Included was Good .  Manual Not Included Shipped with USPS Priority Mail. SPECIFICATIONS: The AOR AR3000 offers high performance and wide coverage: 100 kHz - 2036 MHz in FM-N, FM-W, USB, LSB, CW and AM. 400 memory channels are provided in four banks of 100 channels each. Each memory channel can store: mode, frequency, RF attenuator setting and lockout status. Up to 48 frquencies may be locked-out. The scan rate is 20 channels per second and search rate of 20 steps per second. The front panel is angled for optimum LCD viewing and keypad entry. Other features include: signal strength indicator, clock with sleep timer, tuning knob, keypad entry, record jack, attenuator and RS-232 port. The rear panel antenna input is a 50 ohm BNC.
The AR3000 runs from 13.8 VDC (0.5 Amps) or with supplied 110 VAC wall adapter. 5.5 x 3 x 7.75 inches (138x80x200 mm) 2.6 lbs. (1.2 kg). Frequency coverage: 100 kHz to 2036 MHz
Receiver Modes: AM, NFM, WFM, USB, LSB, CW
Receiver circuitry: Triple (USB/LSB/CW/AM/NFM) & quadruple (WFM) conversion superheterodyne
Memory channels: 400 (4 banks of 100)
Scan rate: 20 channels/second
Search rate: 20 steps/second
Receiver selectivity: 2.4 kHz/-6dB, 4.5 kHz/-60db (USB/LSB/CW)
12 kHz/-6dB, 25 kHz/-70dB (AM/NFM)
180 kHz/-6dB, 800 kHz/-50dB (WFM)
Antenna connector: 50 ohm BNC
Audio output: 1.2 Watts at 4 ohm load 10% distortion
0.7 watts at 8 ohm load 10% distortion
Power Requirements: 13.8 Volts DC, approx. 500 mA
Display : Liquid crystal